|
CORRO-WRAP
COMPOSITES WRAPPING SYSTEM
ONE STEP
INSTANT PIPE REPAIR / REHABILIATTION SYSTEM
FOR ABOVE WATER AND UNDERWATER USE
|
Corro-Wrap, a fiberglass
/ carbon fiber cloth impregnated with a water activated urethane
resin, is used as a protective outer wrap in conjunction with
Corro-Dur 561/Corro-Fix 911 proprietary load transfer agents.
Corro-wrap is an innovative system that offers exceptional mechanical
and impact strength for under water, under ground and above ground
corrosion protection coating application and pipeline / riser
rehabilitation. Wall loss due to external corrosion can be rebuilt
with high performance epoxy system like Corro-Fix 911 and Corro-Dur
561 further strengthen with Corro-Wrap.
|
|
|
|
Corro-Dur 561/Corro-Fix 911 has a complete cross-linking during
the curing process which allows superior adhesion, low permeability
and ability to withstand long term constant submersion without
blistering or peeling.
|
FILLERS
/ EPOXY LOAD TRANSFER AGENTS
CORRO-FIX 911
A highly modified “5-minute”
type repair compound reinforced with Kevlar micro fibers and formulated
for strength and versatility under adverse condition.
CORRO-DUR 561
A high
build version of 258 to withstand heavy abrasion, chemical attack above
or below water over a wide range of substrates to a maximum temperature
resistance of dry 120 ° C /
wet 70 ° C.
A cost
effective version of CD 561 with a longer pot life and is highly recommended
for sea water exposure but will not resist highly aggressive chemicals
lower than pH 4.
A high temperature version of Corro-Dur 561, with exposure to
dry heat at 200 ° C and wet heat to
a maximum of 140 ° C.
CORRO-DUR 258HT
A high temperature version of Corro-Dur 258, with exposure to
dry heat at 200 ° C and wet heat to
a maximum of 140 ° C.
CORRO-DUR 258
A high
performance easily applied thin film solvent free coating reinforced
with Kevlar fibers to achieve outstanding tensile & chemical resistance
coupled with wear resistance over a wide range of substrates above &
below water.
CORROSION, INSULATION, SEALING & WATERPROOF
PROTECTION FOR: -
- Pipes, flanges, joints
and valves, under water, above & below ground.
- Under water pipelines and
platform rig superstructures.
- Concrete, steel & wooden
pilings, in the splash zone, above & below the water line.
- Tie rods, bar reinforcing
rods, cables & ground anchors.
- Structural beams, dolphins,
columns & posts.
- Jetty, bridge & pier
pilings, as well as, superstructure supports.
- Oil, gas, water & chemical
pipelines, under water, above & below ground.
- Municipalities, water &
waste water treatment piping systems.
- Industrial & institutional
plant, piping & duct systems.
|
BENEFITS:
- Resistant to temperature
extremes.
- Easy to apply, no mixing
or messy clean up.
- Resistance to water, acids,
salts or soil organic.
- Can be applied to wet surfaces
and under water.
- Minimal surface preparation
required.
- Quick, long term protective
coating, ready for immediate service.
- Contains no solvents.
|
|
