Corroseal™ Rust Converting Primer is self-inspecting in a short period of time. Improper application defects normally appear within a few minutes to a few hours. Please call our toll-free customer support at 800-237-1573 with any questions or problems that may arrise.

VISUAL APPLICATION GUIDE Corroseal™ Rust Converter is self-inspecting in a short period of time.

 

 

 

Correct Final Appearance after Corroseal™ applied @ 8-10 mil wet (200-250 microns). White epoxy topcoat covers & no black shows through.	Corroseal™ Insufficient Application Gray color in areas indicates need for more Corroseal™. To fix, apply 2nd light pass while surface is still tacky.
Corroseal™ Improper Application. Brown streaks show incomplete conversion, or on wet steel or thinned with water. To fix, remove Corroseal™ & reapply at 8-10 mils wet (200-254 microns).	Corroseal™ Improper Preparation. Speckled discoloration shows salt or chemical contaminants. To fix, Remove coating. Thoroughly clean area, use solvents & Corroseal-Chlor*Rid and reapply Corroseal™.