Maximize
corrosion protection -
Reduce premature coating failure -
Test every surface before coating application as
Specified by NAVFAC
CHLOR*TEST ™ is so complete and easy
to use that even the least experienced inspector can get accurate
results. Imagine, a field test that is easy to use, yet more reliable
than any other method of testing.
When
specifications require consistent, safe and reliable testing results
for chloride contamination, use CHLOR*TEST.
CHLOR*TEST™ is designed to be used on vertical, horizontal
or overhead surfaces.
Each kit contains
five (5) individual tests.
Chlor*Test is
Easy! .
The CHLOR*TEST™
uses a unique patented extract solution, CHLOR*EXTRACT™,
to re-trieve surface chloride contamina-tion. In the field, this
special extract enhances retrieval rates, thereby increasing accuracy.
The greater the retrieval rate, the more accurate the test results.
Empty the
entire contents of the Chlor*EXTRACT™
container into the ChlorSLEEVE™.
Peel off the protective backing, pinch the sleeve
to expel some of the air and adhere to the surface
to be tested
Massage
the extract against the surface: then peel the sleeve off
the surface and place it in the perforated hole in the box
lid.
Snap the
sealed ends off the glass tube, insert it into the
sleeve and down into the extract. In about two minutes
read the color change to identify the chloride level
in both parts per million and micro grams per centimeter
squared, the ratio is 1:1.
CHLOR*TEST™ was developed for
ease of use and to prevent outside and cross contamination.
The components are premeasured to ensure accurate results
in parts per million and micrograms per centimeter square.
In addition, no temperature correction is needed for 41
deg. F to 176 deg. F. Field test inspectors around the world
will use this innovative product with confidence on virtually
any surface at any angle.
CHLOR*TEST™
is so revolutionary, that an inspector will NEVER need;
